08-16-2007 06:44 AM - edited 03-14-2019 11:06 PM
I need to busyout the b-channels on all the T1-PRI's on a WS-SVC-CMM Cat6k voice linecard. I have these configured using MGCP signaling with CCM 4.1.3sr4d
There are active calls on the T1's and I would like to busyout the channels when the call completes.
Any help is greatly appreciated.
Solved! Go to Solution.
08-16-2007 07:42 AM
Hi Anthony,
You can gracefully busy-out (graceful out-of-service) B-channels for troubleshooting purposes. This document discusses how to busy-out B-channels from a Cisco CallManager for Media Gateway Control Protocol (MGCP) controlled T1 or E1 voice ports.
From this excellent doc;
Busy-Out ISDN B-Channels in Cisco CallManager Configuration Example
Hope this helps!
Rob
08-16-2007 07:42 AM
Hi Anthony,
You can gracefully busy-out (graceful out-of-service) B-channels for troubleshooting purposes. This document discusses how to busy-out B-channels from a Cisco CallManager for Media Gateway Control Protocol (MGCP) controlled T1 or E1 voice ports.
From this excellent doc;
Busy-Out ISDN B-Channels in Cisco CallManager Configuration Example
Hope this helps!
Rob
08-16-2007 11:57 AM
Rob,
Thanks for the excellent information. One additional question...
How can I see if the channel is currently active and when it gets gracefully busied?
This gateway is a Cat6500 CMM blade.
08-17-2007 06:37 AM
I don't have in it front of me, but try
show voice call summary
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide