08-16-2007 11:21 AM - edited 03-18-2019 07:42 PM
Unity 4.2(1), AvCsMgr.exe is causing high CPU utilization. We have failover, but only the one that is active has the high utilization. Any thoughts?
08-17-2007 08:53 AM
Hi -
Are you seeing anything unusual in your application event logs? Port utilization - ports at capacity etc. When does this problem occur? I checked Bug Tool and found this bug CSCse99215 when I searched for 'cpu' within the 4.2 train - http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCse99215&from=summary. Not to say this is the problem. The link does reference additional micro traces you can turn on to verify if this issue is YOUR cause. Also found this hit list searching for 'AvCsMgr' - http://tools.cisco.com/Support/BugToolKit/search/getBugSummaryResults.do?method=fetchBugSummaryResults&searchType=advanced
If you haven't already, I would check with TAC on this.
Sincerely, Ginger
08-17-2007 10:09 PM
Thanks for the help. I found that a colision was happening on a vm port. The port is set to only do MWI, but it is recieving calls on this port. I disabled the port and the utiliztion went back to normal. Thank you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide