FTP Through a 2800

brentaustin · ‎08-17-2007

I am wanting to swap a 2600 out with a 2800.

We do application hosting here and one client is behind the said 2600. They do FTP transactions and a few months back when they started this process we fixed the issue by adding the following commands onto the 2600

ip inspect name Ethernet_0_0 ftp

and then

intf 0/0

ip inspect Ethernet_0_0 in

Intf 1/0

ip inspect Ethernet_0_0 in

I copied the config to the 2800 and made adjustments were the intfa names changed and all works great with the exception of FTP. 2600 is back in place until I can get 2800 working.

Cheers,

Brent Austin

rigoberto.cintron · ‎08-17-2007

Did you check that 2800 IOS has the same features as the IOS in the 2600?

brentaustin · ‎08-17-2007

Yes, was done to make it as seamless as possible for all clients...

Unfortunately, it does not do the trick.

Is there a way to just allow ftp to and from that is easier than the one used?

Brent

rigoberto.cintron · ‎08-17-2007

Could you post the 2800 sh ver output and config?