Using the ASA 5505 as a router

Answered Question
Aug 17th, 2007

Hello,


I want to use the ASA as a router between 2 networks.

Outside 192.168.1.0 with the ADSL router in 192.168.1.1 and my inside network in 192.168.3.1.


The two IP allocated to the ASA are 192.168.1.120 outside and 192.168.3.1 inside.


I've to configure a static route, but I can't find a way to route from inside to outside or internet.


Thanks for your help !

Correct Answer by Collin Clark about 9 years 6 months ago

You're probably having an issue with NAT. You can either create a NAT translation for the entire subnet or you could change the security level on both interfaces to be the same and enable same-security-traffic permit inter-interface.


HTH and please rate.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4.8 (3 ratings)
Loading.
Correct Answer
Collin Clark Fri, 08/17/2007 - 05:20

You're probably having an issue with NAT. You can either create a NAT translation for the entire subnet or you could change the security level on both interfaces to be the same and enable same-security-traffic permit inter-interface.


HTH and please rate.

JORGE RODRIGUEZ Fri, 08/17/2007 - 14:22

as indicated by previous poster, your inside net needs to be natted for the ouside world.


global (ouside) 1 interface

nat (inside) 1 0.0.0.0 0.0.0.0 0 0


route outside 0.0.0.0 0.0.0.0 192.168.1.1 1


HTH

Jorge

Actions

This Discussion