PIX 501 - 2 WAN Connections, how to route certain IPs to the 2nd WAN

cphelps11805 · ‎08-17-2007

Hello all,

I have 2 WAN Connections.

1=Broadband connection with static IP (172.23.14.2)

2=T-1 connection with static IP (172.23.14.1)

I want all traffic to default to the Broadband connection (172.23.14.2) but I need a few IPs to route over to the T-1. The IPs I need to route to the T-1 are...

128.1.0.3

172.16.0.154

192.168.192.37

How & where to I enter this information? I only have the GUI interface to work with.

In the PDM I have the following setup and it is not working...

Under the Configuration - Host/Networks tab I've added an Outside Interface named Blah with the following specs.

Basic Info

IP = 128.1.0.3

Mask = 255.255.255.255

Int = outside

Name = Blah

Routing

Checked Define Static Route

Gateway IP = 172.23.14.1

Metric = 2

I have the same setup for the other 2 IPs as well(with different names). I've applied the command and saved the router config and it still doesn't route.

FYI, I changed the Interface to also be Inside just in case and it did not change any of the final results.

Thank you in advance for your assistance!!!!!

cphelps11805 · ‎08-17-2007

Here is my config. FYI, I've replaced passwords with zzzzz & our outside Interface with x.x.x.x

Result of firewall command: "sh run"

: Saved

:

PIX Version 6.3(5)

interface ethernet0 auto

interface ethernet1 100full

nameif ethernet0 outside security0

nameif ethernet1 inside security100

enable password zzzzz encrypted

passwd zzzzz encrypted

hostname pixfirewall

domain-name ciscopix.com

clock timezone EST -5

clock summer-time EDT recurring

fixup protocol dns maximum-length 512

fixup protocol ftp 21

fixup protocol h323 h225 1720

fixup protocol h323 ras 1718-1719

fixup protocol http 80

fixup protocol rsh 514

fixup protocol rtsp 554

fixup protocol sip 5060

fixup protocol sip udp 5060

fixup protocol skinny 2000

fixup protocol smtp 25

fixup protocol sqlnet 1521

fixup protocol tftp 69

names

name 128.1.0.3 blah

access-list inside_outbound_nat0_acl permit ip any 172.23.14.128 255.255.255.192

access-list inside_outbound_nat0_acl permit ip any 172.23.14.160 255.255.255.224

access-list outside_access_in permit tcp any interface outside eq 3389

pager lines 24

mtu outside 1500

mtu inside 1500

ip address outside x.x.x.x 255.255.255.252

ip address inside 172.23.14.2 255.255.255.0

ip audit info action alarm

ip audit attack action alarm

ip local pool vpnpool 172.23.14.151-172.23.14.160

pdm location 172.23.14.0 255.255.255.0 inside

pdm location 65.165.202.144 255.255.255.248 outside

pdm location 204.118.126.3 255.255.255.255 outside

pdm location 204.181.35.98 255.255.255.255 outside

pdm location 204.249.224.128 255.255.255.192 outside

pdm location 24.106.195.64 255.255.255.192 outside

pdm location 24.106.200.64 255.255.255.248 outside

pdm location 192.168.1.0 255.255.255.0 inside

pdm location 172.23.14.5 255.255.255.255 inside

pdm location 172.23.14.160 255.255.255.224 outside

pdm location 172.23.14.128 255.255.255.192 outside

pdm location blah 255.255.255.255 outside

pdm logging informational 100

pdm history enable

arp timeout 14400

global (outside) 1 interface

nat (inside) 0 access-list inside_outbound_nat0_acl

nat (inside) 1 0.0.0.0 0.0.0.0 0 0

static (inside,outside) tcp interface 3389 172.23.14.5 3389 netmask 255.255.255.255 0 0

access-group outside_access_in in interface outside

route outside 0.0.0.0 0.0.0.0 24.38.95.117 1

route outside Meditech 255.255.255.255 172.23.14.1 2

timeout xlate 0:05:00

timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00

timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00

timeout sip-disconnect 0:02:00 sip-invite 0:03:00

timeout uauth 0:05:00 absolute

aaa-server TACACS+ protocol tacacs+

aaa-server TACACS+ max-failed-attempts 3

aaa-server TACACS+ deadtime 10

aaa-server RADIUS protocol radius

aaa-server RADIUS max-failed-attempts 3

aaa-server RADIUS deadtime 10

aaa-server LOCAL protocol local

http server enable

http 204.181.35.98 255.255.255.255 outside

http 24.106.195.64 255.255.255.192 outside

http 24.106.200.64 255.255.255.248 outside

http 192.168.1.0 255.255.255.0 inside

http 172.23.14.0 255.255.255.0 inside

no snmp-server location

no snmp-server contact

snmp-server community public

no snmp-server enable traps

floodguard enable

sysopt connection permit-ipsec

sysopt connection permit-pptp

crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac

crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac

isakmp enable outside

isakmp enable inside

telnet 172.23.14.0 255.255.255.0 inside

telnet 192.168.1.0 255.255.255.0 inside

cphelps11805 · ‎08-17-2007

telnet timeout 5

ssh timeout 5

console timeout 0

vpdn group PPTP-VPDN-GROUP accept dialin pptp

vpdn group PPTP-VPDN-GROUP ppp authentication mschap

vpdn group PPTP-VPDN-GROUP ppp encryption mppe auto required

vpdn group PPTP-VPDN-GROUP client configuration address local vpnpool

vpdn group PPTP-VPDN-GROUP pptp echo 60

vpdn group PPTP-VPDN-GROUP client authentication local

vpdn username administrator password *********

vpdn username helpdesk password *********

vpdn username mblackburn password *********

vpdn username bseiss password *********

vpdn username rviola password *********

vpdn username moc2 password *********

vpdn enable outside

vpdn enable inside

dhcpd lease 3600

dhcpd ping_timeout 750

dhcpd auto_config outside

terminal width 80

Cryptochecksum:zzzzz

: end

cphelps11805 · ‎08-20-2007

Just checking to see if anyone can assist me with this problem. If I'm in the incorrect forum please let me know.

Cordially,

Chris