08-17-2007 09:23 PM
Hello,
When I change my server's default gateway from my router to the ACE Blade, I can no longer acess the server except for on the same lan. I create a route map on the router hoping this would help. but it did not. Here is my route-map info:
access-list 120 permit tcp 10.4.7.6 0.0.0.0 eq telnet 64.78.154.58 0.0.0.0
access-list 120 permit tcp 10.4.7.6 0.0.0.0 eq 8082 64.78.154.58 0.0.0.0
route-map cacheservers permit
match ip address 120
set ip next-hop 64.78.154.7
apply to vlan 11
int vlan 11
ip policy route-map cacheservers
My guess is a symmetric routing.... but How do I resolve this? I know nating will work, but I can't nat do to some requiments to see the real IP's.
08-18-2007 08:33 PM
Do you have a route to the gateway on the ACE ?
If possible post a sanitized configuration.
Thanks
KS
08-20-2007 02:16 AM
is the traffic asymetric ?
like the client going through the router and the server responding through ACE ?
ACE does not like asymtric traffic. So make sure all traffic goes through ACE.
Gilles.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: