about C2611XM

Unanswered Question
Aug 18th, 2007

First, I'm not Bilingual so excuse my English.

Dear Sirs,

Does C2611XM support NM-1FE2W ?

Cisco Ethernet/Token Ring Mixed Media Network Modules

Table 5. 10/100 LAN/WAN combo Network Modules (NM-1FE2W, NM-2FE2W, NM-1FE1R2W, and NM-2W) platforms supported, minimum Cisco IOS? Release, minimum Memory and Maximum Number Supported.

Cisco 2600XM Series 12.2(8)T

http://www.cisco.com/en/US/products/hw/routers/ps259/products_data_sheet09186a00801aa71c.html#wp9000230

Best regards,

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4.5 (2 ratings)
Loading.
mohammedmahmoud Sat, 08/18/2007 - 01:31

Hi,

AFAIK, the 2600 series supports NM-2W only (with no LAN interface).

HTH,

Mohammed Mahmoud.

royalblues Sat, 08/18/2007 - 02:49

As per the Cisco router guide, the NM-1FE2W-V2 card is supported only on the 2691 with IOS 12.2(13)T3

HTH

Narayan

mohammedmahmoud Sat, 08/18/2007 - 03:01

Hi,

I've double checked and Narayan is correct, only the 2691 supports the NM-1FE2W card, while your 2611 will only support NM-2W.

HTH,

Mohammed Mahmoud.

Actions

This Discussion