08-18-2007 05:36 AM - edited 03-09-2019 06:38 PM
Good evening
I have a problem, I hope someone can help me.
I have to forward the traffic of my Cisco Router 877W (ip:10.10.10.1) into a hardware firewall (ip: 10.10.10.50) and I can't do it.
Could you give me some advice??
Thanks for your attention.
Solved! Go to Solution.
08-20-2007 08:55 AM
Hi Marco,
I'm not sure if that helped you, but if it helped then I would request you to mark it resolved so that other can benefit .
Regards,
~JG
08-18-2007 06:35 AM
Hi Marco,
ip route 0.0.0.0 0.0.0.0 10.10.10.50
!-- Static default route pointing to the Firewall.
http://www.cisco.com/warp/public/105/36.html
Regards,
~JG
Please rate helpful posts
08-20-2007 08:30 AM
hi jgambhir, thank very much for your help!
08-20-2007 08:55 AM
Hi Marco,
I'm not sure if that helped you, but if it helped then I would request you to mark it resolved so that other can benefit .
Regards,
~JG
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: