Point to point Bandwidth

Answered Question
Aug 19th, 2007
User Badges:

dear sir

I am using Pont to point microsoft base VPN and using CCME on both side , i wanna know how much bandwidth will be used for 1 voice call from side A to side B with VPN ? and can i register Ip Phone From side A to Side B using CCME ?

I m currenly using 64 K link.

Your assistance will be hihgly appreciatable.

Correct Answer by paolo bevilacqua about 9 years 11 months ago

A regular g.711 call takes almost 90 Kbps plus the VPN overhead.


Your call should work OK on 64 K links if you configure codec g711ulaw under ephone.


If the VPN is passing all the traffic OK, you can register phones across the link without problems.


Hope this helps, please rate post if it does!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (1 ratings)
Loading.
Correct Answer
paolo bevilacqua Sun, 08/19/2007 - 11:24
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

A regular g.711 call takes almost 90 Kbps plus the VPN overhead.


Your call should work OK on 64 K links if you configure codec g711ulaw under ephone.


If the VPN is passing all the traffic OK, you can register phones across the link without problems.


Hope this helps, please rate post if it does!

Actions

This Discussion