Solved: Point to point Bandwidth

zeeshan2007 · ‎08-19-2007

dear sir

I am using Pont to point microsoft base VPN and using CCME on both side , i wanna know how much bandwidth will be used for 1 voice call from side A to side B with VPN ? and can i register Ip Phone From side A to Side B using CCME ?

I m currenly using 64 K link.

Your assistance will be hihgly appreciatable.

paolo bevilacqua · ‎08-19-2007

A regular g.711 call takes almost 90 Kbps plus the VPN overhead.

Your call should work OK on 64 K links if you configure codec g711ulaw under ephone.

If the VPN is passing all the traffic OK, you can register phones across the link without problems.

Hope this helps, please rate post if it does!

View solution in original post

paolo bevilacqua · ‎08-19-2007

A regular g.711 call takes almost 90 Kbps plus the VPN overhead.

Your call should work OK on 64 K links if you configure codec g711ulaw under ephone.

If the VPN is passing all the traffic OK, you can register phones across the link without problems.

Hope this helps, please rate post if it does!