ACS 1113 appliance integration with RSA -Urgent

Answered Question
Aug 20th, 2007

Hi Experts ,

I got the following steps to install patch on ACS 1113 V 4.0 Box.

Instructions on how to install the patch


1. Extract the CSAuth.exe from

2. Stop service CSAuth

3. Locate <acs dir>\bin and save a copy of current CSAuth.exe

4. Copy new CSAuth.exe extracted from zip to <acs dir>\bin

5. Start service CSAuth

In step 3, it was mentioned that locate <acs dir>\bin and save a copy of current CSAuth.exe(i.e on ACS 1113 appliance).Could any one help me out the steps to locate the ACS dir on ACS 1113 appliance.



I have this problem too.
0 votes
Correct Answer by Jagdeep Gambhir about 9 years 5 months ago


These steps are for acs running on windows. For appliance steps are different. You need patch for appliance.

Attached are the patch upload steps for appliance

You can download the appliance patch from

Please rate if helps



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
smothuku Mon, 08/20/2007 - 06:01

Hi Gambir ,

Thanks a lot for info...

we got sruck at one point .i.e point no 3. Locate acs/dir.

I would like to know how to locate acs dir on ACS 1113 appliance(V4.0) to copy and save current CSAuth.exe before going for patch upgradation..

Please find the attached file ..



Jagdeep Gambhir Mon, 08/20/2007 - 06:07


Again you are looking at the wrong doc. You have acs appliance and these steps are for if you have acs installed on windows computer.

You need to download the patch for acs appliance from the link I provided.

Once you have the appliance patch, you will apply it as per the doc attached in my last post.


smothuku Mon, 08/20/2007 - 10:56



Thanks a lot for info...

Will update once i try on appliance,




This Discussion