08-20-2007 05:37 AM - edited 03-10-2019 03:20 PM
Hi Experts ,
I got the following steps to install patch on ACS 1113 V 4.0 Box.
Instructions on how to install the patch
========================================
1. Extract the CSAuth.exe from ACS-4.0.1-RSA-SW-CSCsc12614-CSCsd41866.zip
2. Stop service CSAuth
3. Locate <acs dir>\bin and save a copy of current CSAuth.exe
4. Copy new CSAuth.exe extracted from zip to <acs dir>\bin
5. Start service CSAuth
In step 3, it was mentioned that locate <acs dir>\bin and save a copy of current CSAuth.exe(i.e on ACS 1113 appliance).Could any one help me out the steps to locate the ACS dir on ACS 1113 appliance.
Thanks,
Satish
Solved! Go to Solution.
08-20-2007 05:47 AM
Satish,
These steps are for acs running on windows. For appliance steps are different. You need patch for appliance.
Attached are the patch upload steps for appliance
You can download the appliance patch from
http://www.cisco.com/cgi-bin/tablebuild.pl/acs-soleng-3des
Please rate if helps
Regards,
~JG
08-20-2007 05:47 AM
Satish,
These steps are for acs running on windows. For appliance steps are different. You need patch for appliance.
Attached are the patch upload steps for appliance
You can download the appliance patch from
http://www.cisco.com/cgi-bin/tablebuild.pl/acs-soleng-3des
Please rate if helps
Regards,
~JG
08-20-2007 06:01 AM
08-20-2007 06:07 AM
Hi,
Again you are looking at the wrong doc. You have acs appliance and these steps are for if you have acs installed on windows computer.
You need to download the patch for acs appliance from the link I provided.
Once you have the appliance patch, you will apply it as per the doc attached in my last post.
Reagrds
08-20-2007 10:56 AM
Hi,
jgambhir,
Thanks a lot for info...
Will update once i try on appliance,
Thanks,
Satish
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: