08-20-2007 09:00 PM - edited 03-18-2019 07:43 PM
Hi,
Can anyone show me some proof that CM ver 4.1(3)sr5b will work on Windows 2003?
We are planning to upgrade this week to Win 2003 and looking if this upgrade will give us some issue.
tia
Robert
08-21-2007 05:41 AM
Well .. this would not work. OS 2003.1.1 and above is only supported with CM 4.3 onwards only. Therefore you cannot install CM 4.1(3) with Windows 2003
08-21-2007 07:16 AM
It will not work, Win 2003 is only supported on CCM 4.3, you can see that on the Release notes:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/4_3/rel_note/431cmrn.htm#wp2566469
In other words, do not perform that upgrade, it will break your system.
HTH
//Jorge
04-01-2008 10:51 PM
Thanks for the reply.
Now we are ready for the upgrade.
Can anyone give me some good procedure or step by step on how to install CCM 4.3(2) on a new win2003 server.
tnx
04-02-2008 05:50 AM
Hi Robert,
These are probably two of the better places to start the Upgrade path :) Pretty good docs;
Cisco Unified CallManager Documentation Guide for Release 4.3(1)
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/docguide/4_3/dg431.html
Upgrading Cisco Unified CallManager, Release 4.3(1)
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/upgrade/4_3_1/upg431.html
Hope this helps and best of luck!
Rob
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: