Can be an IOS issue which is causing errors and bounces?

Unanswered Question
Aug 21st, 2007
User Badges:

I've one cisco 2621XM with 125952K/5120K of Ram and 49152K of Flash and IOS c2600-is-mz.122-15.T13. It has one wic-2t and 4 Bri for backup and its serial port is connected to one leased line. Since we're experiencing some randomic errors and bounce and Ptt has investigated all the possible issues and we've also changed the router, I'd like to know if there could be an IOS issue which is causing the trouble.Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (1 ratings)
Loading.
royalblues Tue, 08/21/2007 - 01:18
User Badges:
  • Green, 3000 points or more

you can certainly check by uploading a newer version of the code.


I had once faced a similar problem but it turned out to be an earthing problem which sounds crazy though


HTH

Narayan

maghisi-2007 Tue, 08/21/2007 - 03:08
User Badges:

OK thanks. Do you suggest to immediately move to IOS 12.4 or version 12.3 can be fine?

royalblues Tue, 08/21/2007 - 03:16
User Badges:
  • Green, 3000 points or more

12.4 should be good or you can try the GD verion of the 12.3 code


Narayan

Actions

This Discussion