How to check DSCP field without phuysical access

Answered Question
Aug 21st, 2007

Hi all,


We need check if the packets leaving our 3750 in a specific port are actually marked with EF. But we can't use a sniffer. Any idea? I've been trying some "sh mls qos" but the outputs don't show anything...


thanks in advance,

Correct Answer by royalblues about 9 years 6 months ago

Can you try

sh mls qos interface statistics or

sh mls qos interface statictics.


These commands should tell you whether DSCP is being set correctly


HTH

Narayan


please rate all posts

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
royalblues Tue, 08/21/2007 - 02:26

Can you try

sh mls qos interface statistics or

sh mls qos interface statictics.


These commands should tell you whether DSCP is being set correctly


HTH

Narayan


please rate all posts

Actions

This Discussion