I do have a 6509-E with the FWSM module, I created two context within the FWSM, context A and context B, both in transparent mode.
Context A is "conected" to the MSFC via BVI with the IP 192.168.180.2, the MSFC IP for VLAN180 is 192.168.180.1, in context A VLAN180 is binded to the BVI. So far until this point I have a connection between the MSFC and Context A.
Now, if I want to put a server behind context A with server IP=192.168.180.100, and be able to apply some ACLs to allow certain traffic to the server, how I would achieve this?
I know that in this mode the context need two logical interfaces, one is VLAN180 already binded to the BVI, but what about the logical interface where I'm supposed to connect to the server?
Thanks in advance