limit SNMP trap to certain interfaces

olivierchambon · ‎08-22-2007

Hi,

I would like to limit the visibility to certain interfaces on a router. for example I don't want the dialer interface to be seen by SNMP. What command could I use to do that?

Thanks,

Olivier

David Stanford · ‎08-22-2007

May be tough to do, but you could try using snmp server views to limit access to certain interfaces.

This may get a bit complex, but you could try limiting access to the ifIndex.X (X represents the interface in question)

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094489.shtml#setupsnmp