08-22-2007 05:43 AM - edited 03-14-2019 11:11 PM
Something simple that I haven't been able to figure out.
On the 7960/40 phone models, I used to be able to get into network settings, scroll down to option 33 and hit **# to allow me to erase the network settings. This would clear everything and grab the settings again from DHCP. How do I do this on a 7961/41? The "erase config" option is not available under network settings anymore. These phones haven't been restricted in any way that I know of, unless there is a default to do this.
Solved! Go to Solution.
08-22-2007 01:57 PM
Please try the following:
1) Hit the Settings button
2) Enter **#
3) When the screen says Unlocked, hit the More softkey
4) You should then see the Erase softkey.
08-22-2007 01:57 PM
Please try the following:
1) Hit the Settings button
2) Enter **#
3) When the screen says Unlocked, hit the More softkey
4) You should then see the Erase softkey.
08-24-2007 05:41 AM
Thank you. That did it.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: