08-22-2007 06:20 PM - edited 03-03-2019 06:26 PM
Dear All,
Now i have problem with ASA5510.
i had order ASA5510-k8,so this model not support 3des.my system need to support 3des.
How can i upgrate to 3des?
Please help me to solve this problem.
Best Regards,
Join
Solved! Go to Solution.
08-22-2007 06:43 PM
Hi
You can apply for a free license ugrade on Cisco's site for the ASA. Please follow this link
https://tools.cisco.com/SWIFT/Licensing/PrivateRegistrationServlet
HTH
Jon
View solution in original post
08-22-2007 07:16 PM
Dear Jon,
Thank you for your advice.
After i registered already,but i didn't receive email from cisco.
Can i register one more time?
08-22-2007 09:55 PM
You get it usually. Check if there is a spam filter.
Try sending a mail to licensing@cisco.com requesting for a Key,
from your Personal E-Mail ID so that you can avoid SPAM Filters
HTH - Pls rate if this is useful
08-22-2007 11:11 PM
As Anand says check if you have any filters on that would stop you receiving it.
Whenever i have applied for a 3DES free ugrade license it usually arrives in my inbox within about 10 minutes.
08-23-2007 06:39 AM
https://tools.cisco.com/SWIFT/Licensing/PrivateRegistrationServlet?FormId=139
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community
