Cisco Catalyst 500 and NTP

Unanswered Question
Aug 23rd, 2007
User Badges:

Hi All,


Does anyone know how to change\add a ntp server into the config on a catalyst 500 express switch?


It seems to be going to an internet NTP server by default.


Many Thanks


Andy

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
massimiliano.se... Thu, 08/23/2007 - 03:34
User Badges:
  • Silver, 250 points or more

Hi,

From: http://www.cisco.com/application/pdf/en/us/guest/products/ps6545/c2001/ccmigration_09186a0080539179.pdf


The switch clock is automatically synchronized with the

system clock on your network management station. You can manually set the

system clock settings if the switch should have different time settings.


I hope this helps.

Best regards.

Massimiliano.


purohit_810 Tue, 08/28/2007 - 10:17
User Badges:
  • Silver, 250 points or more

Task Command

Step 1

Specify the IP address of the NTP server.

set ntp server ip_addr

Step 2

Enable NTP client mode.

set ntp client enable

Step 3

Verify the NTP configuration.

show ntp [noalias]

Regards,

Dharmesh Purohit

Actions

This Discussion