Integrating Call Manager 4.2.3 with active directory

Unanswered Question
Aug 23rd, 2007
User Badges:

I wanted to find some information about intgrating ccm with active directory. Also if there is a guide out there and someone can provide me with the link that would be really appreciated.


thank you

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Rob Huffman Thu, 08/23/2007 - 12:58
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Ali,


Here are the guides to get you started;


Active Directory 2000 Plugin Installation for Cisco CallManager


http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080094493.shtml


Active Directory and Cisco CallManager Integration Troubleshooting Guide


http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801d3c48.shtml


This chapter focuses on best practices for AD. However, most recommendations and best practices mentioned in this section also apply to the other directory product supported by Cisco Unified CallManager, the Sun/iPlanet Netscape Directory Server.


From this excellent SRND doc;


http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_implementation_design_guide_chapter09186a00806e8c04.html#wp1068184


This chapter covers the main design principles for integrating a Cisco IP Communications system based on Cisco Unified CallManager 4.x with a corporate LDAP directory.


http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_implementation_design_guide_chapter09186a00806e8c04.html#wp1043057


Hope this helps!

Rob

Actions

This Discussion