Sup 720 status LED

gautamzone · ‎08-25-2007

Hi friends,

There was a power down in the data center and after it was up, the status LED on the 720 sup showed the following:

1. On the first 6513 switch, Port 2 UTP link led showed amber for both active and standby supervisors.Nothing was connected to those ports.

2. On the second 6513 switch, Port

Port 1 and Port 2 link LED's showed amber for both active and standby supervisors. Nothing was connected to those ports.

Right now, everything is normal, but do these ambers indicate any problem.

Thanks a lot

Gautam

massimiliano.serafino · ‎08-25-2007

Hi,

You could try this: enable ports with no shutdown.

I hope this helps.

Best regards.

Massimiliano.