08-27-2007 05:33 AM - edited 07-03-2021 02:32 PM
Hello,
I need a POE cable of 40 meters between the 1310 bridge and the power injector.I found this reference: AIR-CAB100DRG6-F.
It's OK for a 1310?
Thanks,
Solved! Go to Solution.
08-28-2007 10:11 AM
Hi Herve,
I think you are better off ordering up a custom length cable (RG6 Coax with F-Type connectors). Here is an example of someone who makes up custom cables;
http://www.lextec.com/lex_custom.html
Hope this helps!
Rob
08-27-2007 08:16 AM
Hi Herve,
Yes, that Dual-Coax cable assembly will be perfect for your needs. This cable is referred to as a side note in some of the 1310 docs so you should be good to go :)
Hope this helps!
Rob
08-28-2007 12:54 AM
Hi Rob,
The AIR-CAB100DRG6-F cable Length is 100 ft. (30m), do you know if it's possible to interconnect two cables to make 60m or if it's possible to manufacture its own cable?
Thanks,
Herv?
08-28-2007 10:11 AM
Hi Herve,
I think you are better off ordering up a custom length cable (RG6 Coax with F-Type connectors). Here is an example of someone who makes up custom cables;
http://www.lextec.com/lex_custom.html
Hope this helps!
Rob
08-29-2007 04:28 AM
Hi Rob,
Thanks for you help.
Herv?
08-29-2007 04:32 AM
Hi Herve,
You are most welcome my friend :) Best of luck with your deployment!
Take care,
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide