Issue setting up ASA 5510 L2L

rchapman · ‎08-27-2007

Having errors connecting a simply L2L VPN between Linksys and the 5510. will attach running config and debug files. Any input would be helpful.

Thanks

Ron

purohit_810 · ‎08-28-2007

This is bug ID: CSCsb82618

Do you have 7.1 Version?

See on : http://www.cisco.com/en/US/docs/security/pix/pix71/release/notes/pixrn711.html

Regards,

Dharmesh Purohit

purohit_810 · ‎08-28-2007

You can see all are error massage on below url:

http://www.cisco.com/en/US/docs/security/asa/asa70/system/message/logsev.html

Regards,

Dharmesh

rchapman · ‎08-28-2007

Looks like I am running version 7.0(6) new out of the box. I could download the latest Image however it looks like I will forego using my two SSL license's that I was going to test with :(

Regards,

Ron

rchapman · ‎08-28-2007

After updating to asa 7.2 I am getting this error from debug cmd debug crypto isakmp

Aug 28 23:40:20 [IKEv1]: IP = 69.137.178.185, Removing peer from peer tab

le failed, no match!

Aug 28 23:40:20 [IKEv1]: IP = 69.137.178.185, Error: Unable to remove PeerTblEnt

ry

Regards,

Ron

acomiskey · ‎08-31-2007

Ron,

Would you mind posting a clean config from the ASA?

rchapman · ‎08-31-2007

I contacted Tac and was able to figure out that the Linksys VPN side of the tunnel was not routing back through the tunnel correctly. I have since wiped the Linksys configuration and reconfigured it with successes.

regards,

Ron