08-27-2007 03:21 PM
Having errors connecting a simply L2L VPN between Linksys and the 5510. will attach running config and debug files. Any input would be helpful.
Thanks
Ron
08-28-2007 10:40 AM
This is bug ID: CSCsb82618
Do you have 7.1 Version?
See on : http://www.cisco.com/en/US/docs/security/pix/pix71/release/notes/pixrn711.html
Regards,
Dharmesh Purohit
08-28-2007 10:55 AM
You can see all are error massage on below url:
http://www.cisco.com/en/US/docs/security/asa/asa70/system/message/logsev.html
Regards,
Dharmesh
08-28-2007 12:57 PM
Looks like I am running version 7.0(6) new out of the box. I could download the latest Image however it looks like I will forego using my two SSL license's that I was going to test with :(
Regards,
Ron
08-28-2007 03:51 PM
After updating to asa 7.2 I am getting this error from debug cmd debug crypto isakmp
Aug 28 23:40:20 [IKEv1]: IP = 69.137.178.185, Removing peer from peer tab
le failed, no match!
Aug 28 23:40:20 [IKEv1]: IP = 69.137.178.185, Error: Unable to remove PeerTblEnt
ry
Regards,
Ron
08-31-2007 10:37 AM
Ron,
Would you mind posting a clean config from the ASA?
08-31-2007 12:34 PM
I contacted Tac and was able to figure out that the Linksys VPN side of the tunnel was not routing back through the tunnel correctly. I have since wiped the Linksys configuration and reconfigured it with successes.
regards,
Ron
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: