08-28-2007 05:40 PM - edited 03-03-2019 06:30 PM
What is needed for complete connection with a cisco PIX 515 and cisco vpn client software for windows v.4 & up?
08-28-2007 11:13 PM
Hi,
Let's take a look at the following link:
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a008088a1e0.shtml
Hope it helps, rate if does
Krisztian
08-29-2007 05:50 AM
That is depend upon you, how would you configure.. Possible scenario as below.
1) If you have few clients mean username and password you can create locally IPSEC username.
2)If you have more username and password than you can create it in ACS (RADIUS and TACACS+ Server) and authenticate bythem.
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a008009442e.shtml
Regards,
Dharmesh Purohit
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
