VPN Concentrator Identity Certificate

zih-netadm · ‎08-29-2007

I tried to enroll an Identity Certificate via PKCS10 Request (Manual) and choosed a 2048 bit RSA key.

The problem is that RSA key is only 2047 bit long. I have tested it with openssl. The Concentrator GUI says the key is 2048 long.

How can I get a certificate request with a 2048 bit RSA key?

I need a really 2048 bit RSA key because the CA

does not support smaller keys.

purohit_810 · ‎08-29-2007

RSA has also available 1024 bit long..

See here.. your answer: FOR KEY

http://www.cisco.com/en/US/customer/products/hw/vpndevc/ps2284/products_tech_note09186a00800946f1.shtml

Regards,

Dharmesh Purohit

zih-netadm · ‎08-29-2007

The problem is my Certification Authority (CA) requires a RSA key with minimum size of 2048 bit. When I create a PKCS#10 manual certificate request on VPN Concentrator with 2048 bit RSA key size this key is only 2047 bits long. You can verify that with openssl.