08-30-2007 04:57 AM - edited 03-14-2019 11:18 PM
Hello All,
I have a query I have old Anlog phones with me and company dosnt want to throw those old phones and I just have two ports available one for voice and one for data.Now how should I use my old phones if at all I want to use Call manager.Do I need to by IP phones only.What exactly can be the solution.Do we have any converter that I can use to integrate old phones (Panasonic) with call manager.
Thanks in Advance
Regards
Divyendu
08-30-2007 05:02 AM
Hi,
If you have few phones, you can use Cisco ATA-186 that it porvides you with two analog ports. Cisco ATA is an 'analog to IP' device converter.
If you have a lot phones you can use an Cisco VG-224, which provides 24 analog FXS ports.
Hope this helps,
Juan Luis
08-31-2007 03:44 AM
Hello Luis,
Thanks a lot for your help, I was totally blank now i got the right path to move....
Regards
Divyendu
08-31-2007 05:09 AM
Hi,
Don't forget to rate helpful posts.
Juan Luis
08-31-2007 04:27 AM
Dear, If you have more than two phones then you can use VG248 - that will give you the option to use 48 analog phone with CCM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide