08-30-2007 04:57 AM - edited 03-14-2019 11:18 PM
Hello All,
I have a query I have old Anlog phones with me and company dosnt want to throw those old phones and I just have two ports available one for voice and one for data.Now how should I use my old phones if at all I want to use Call manager.Do I need to by IP phones only.What exactly can be the solution.Do we have any converter that I can use to integrate old phones (Panasonic) with call manager.
Thanks in Advance
Regards
Divyendu
08-30-2007 05:02 AM
Hi,
If you have few phones, you can use Cisco ATA-186 that it porvides you with two analog ports. Cisco ATA is an 'analog to IP' device converter.
If you have a lot phones you can use an Cisco VG-224, which provides 24 analog FXS ports.
Hope this helps,
Juan Luis
08-31-2007 03:44 AM
Hello Luis,
Thanks a lot for your help, I was totally blank now i got the right path to move....
Regards
Divyendu
08-31-2007 05:09 AM
Hi,
Don't forget to rate helpful posts.
Juan Luis
08-31-2007 04:27 AM
Dear, If you have more than two phones then you can use VG248 - that will give you the option to use 48 analog phone with CCM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: