Solved: Limit Traffic from a Network with ACLs?

elkono200 · ‎08-30-2007

hi,

can i limit the network traffic from a specific network with acl?

thx

Jon Marshall · ‎08-30-2007

Hi

Okay different question than i originally thought. I assumed you mean restrict in terms of access-lists but you mean how to do QOS (Quality of Service).

Yes you can do this by applying QOS policies to your vlan interfaces. Attached is a link to QOS configuration for the 3750 on your switch

http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_guide_chapter09186a008081df7e.html

HTH

Jon

View solution in original post

Jon Marshall · ‎08-30-2007

Hi

Yes you can. Could you provide some more details as to exactly what you want.

Jon

elkono200 · ‎08-30-2007

hi,

i want to do following.

i have a cisco 3750-48PS with 12.2(37)SE1 - IPBase Image.

i.e

user from Network 192.168.1.0/24 have only 1MBit of http Traffic to Network 192.168.2.0/24.

if there are a lot of user from that network they will have only 1MBit for all http.

user from Network 192.168.5.0/24 have only 3MBit of http Traffic to Network 192.168.2.0/24.

etc.

thx

Jon Marshall · ‎08-30-2007

Hi

Okay different question than i originally thought. I assumed you mean restrict in terms of access-lists but you mean how to do QOS (Quality of Service).

Yes you can do this by applying QOS policies to your vlan interfaces. Attached is a link to QOS configuration for the 3750 on your switch

http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_guide_chapter09186a008081df7e.html

HTH

Jon