cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
341
Views
0
Helpful
2
Replies

Br1410 connecting to 3750 Stack doesn't show up in CDP

Chris Bomba
Level 4
Level 4

I have a situation where I have 3 pairs of Br1410s at a site and they are all connecting to Catalyst 3750s. When do a "show cdp neighbors" on the bridges I see the switches, but when I do the same command on the switches I don't see any of the bridges. I checked and CDP is enabled. I also have another site where I have Br1410s connected to Catalyst 2950s and when I do a "show cdp neighbors" on those switches I do see the bridges? Is there something wrong with cdp between Br1410s and Catalyst 3750s?

Br1410 - Version 12.3(8)JEA

Cat 3750 - Version 12.2(25)SEE3

Thanks,

Chris

2 Replies 2

janf
Level 1
Level 1

I have a pair of 1410s attached to stacked 3750s and both show up on the 3750 "show cdp ne" command. The 3750s version is 12.1(19)EA1c, one 1410 is 12.4(3g)JA and the other 12.2(15)JA. You may want to check the 1410 configs to make sure cdp is not disabled on either the F0 or BVI1 interfaces.

Yeah, I double and triple checked that CDP wasn't disabled anywhere. I am going to have to maybe reboot those devices to see if anything is up with them. If there are any other suggestions please let me know.

Thanks,

Chris

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: