Headset issue

Unanswered Question
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Rob Huffman Thu, 08/30/2007 - 15:21
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Len,

With many headsets and Cisco phones you need a different cord than what comes with the Headset (not unusual and usually pretty cheap $) It looks like the 2125 NC ships with the Cord Model# 8800-01 (Part#1003945) and with the 7960 you need Cord Model# 8800-02 (Part#27361101) The GN 2125 NCD-02 comes with the correct cord it looks like.

From this good reference doc;


Plantronics headsets which we use require a special cord as well :)

Hope this helps!


mshavrov Mon, 10/01/2007 - 05:02
User Badges:

It looks like this headset may require external amplifier. I read about them, and everybody claims different features for the same model. However it looks like nobody really tells that it works with Cisco phones without amplifier. Also, where do you connect it? To the Headset port? Cisco has different signaling for Headset and Handset ports.

Good luck,

Michael Shavrov


Headset Adapters for Cisco IP Phones




This Discussion