ASA 5520 running 8.0(2), can't get asa to pass DHCP request to internal DHCP server. I've done serveral capture on inside interface and never see any request being forwarded. We normally use the microsoft vpn client, but I've tested with cisco client as well with same results. It is assigned at the group policy and the connection proffile to use DHCP, server and scope needed is identified. Please Help.....
MODE_CFG: Received request for DHCP hostname for DDNS is: x.x.x.x!
[IKEv1 DEBUG]: Group = xxxxx, Username = xxxxxxxx, IP = x.x.x.x, IKE received response of type  to a request from the IP address utility
[IKEv1]: Group = xxxx, Username = xxxxxxxxx, IP = x.x.x.x, Cannot obtain an IP address for remote peer