aironet 1200 and AWCVX-MIB.my

Unanswered Question
Aug 31st, 2007

(firmware 12.3JEB)

I want to distinguish if an AP is in 802.11 a or b / g mode.

I have tried to get specific information from AWCVX-MIB.my.

For example i have tried to read AWCVX-MIB::awcDot11CurrentCarrierSet,AWCVX-MIB::awcDot11CurrentChannel

objects but the above MIB is not supported ):

The strange thing is that the web interface can distinguish if the radio interface operates at 2.4GHz or 5GHz and also can distinguish the mode a or b/g.

Is there an alternative solution to find this information through SNMP?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
David Stanford Fri, 08/31/2007 - 06:53

You might want to look at the CISCO-DOT11-RADIO-DIAGNOSTIC-MIB and the CISCO-DOT11-ASSOCIATION-MIB to see if they provide the objects you are looking for.

theodionys Mon, 09/03/2007 - 05:44

Hello,

I still can't get the information from the above MIBS...

SNMP Output(For 3 connected Clients) - Cisco Aironet 1200 firmware version-->12.3JEB

CISCO-DOT11-ASSOCIATION-MIB::cDot11ClientRadioType.1."gstam-cisco".'.....a' = INTEGER: unknown(1)

CISCO-DOT11-ASSOCIATION-MIB::cDot11ClientRadioType.1."gstam-cisco".'.....'' = INTEGER: unknown(1)

CISCO-DOT11-ASSOCIATION-MIB::cDot11ClientRadioType.1."gstam-cisco".'..~.!y' = INTEGER: unknown(1)

CISCO-DOT11-RADIO-DIAGNOSTIC-MIB::cDot11RadioDiagTempChannel.1 = Gauge32: 0

CISCO-DOT11-RADIO-DIAGNOSTIC-MIB::cDot11RadioDiagTempTxPowerLevel.1 = Gauge32: 0

CISCO-DOT11-RADIO-DIAGNOSTIC-MIB::cDot11RadioDiagMode.1 = INTEGER: 0

CISCO-DOT11-RADIO-DIAGNOSTIC-MIB::cDot11RadioDiagSettingsEnabled.1 = INTEGER: false(2)

CISCO-DOT11-RADIO-DIAGNOSTIC-MIB::cDot11RadioDiagTempClientTxPower.1 = Gauge32: 0

CISCO-DOT11-RADIO-DIAGNOSTIC-MIB::cDot11RadioDiagTempDataRateSet.1 = Hex-STRING: 00 00 00 00 00 00 00 00 00 00 00 00

arunsprasath Mon, 12/10/2007 - 06:11

cDot11RadioDiagMode OBJECT-TYPE

SYNTAX INTEGER {

normal(1),

apRadioDiscovery(2),

siteSurveyTempSettings(3),

siteSurveyNonTempSettings(4)

}

Here how to use that apRadioDiscovery..

There is no description about the object value.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode