Billing system RTS with AS5400

Unanswered Question
Aug 31st, 2007
User Badges:

dears,

i have problem with AAA i have a billing system i need AS5400 to make AAA with it

i did this configuration :


3. aaa new-model

4. aaa authentication login default group radius

5. aaa authorization exec default group radius

6. aaa accounting connection default start-stop radius

7. radius-server host

8. radius-server host non-standard

9. radius-server key

10. radius-server vsa send accounting

radius-server vsa send authentication


11. gw-accounting aaa

12. adius-server host 171.69.58.104 auth-port 165 acct-port 1646


13.radius-server key testing123



and did not work and no radius packet reach radius server .... i need your help please.


thx

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
teodorgeorgiev Fri, 09/14/2007 - 00:35
User Badges:
  • Bronze, 100 points or more


It will not.

You have to configure the AAA class not for "default", but for h323.


aaa accounting connection h323 start-stop radius


Add this command and then run:


debug radius accounting

debug radius verbose

term mon


and you will see how the Cisco GW will start sending accounting packets to the billing system (Radius server).


Then, if you want h323 authentication as well:


aaa authentication login h323 group radius


tareqrebhi Sun, 10/28/2007 - 00:22
User Badges:

thank you,

dear i have important question i need to implement and configure my Voice Gateway AS5400 to send numbering with E.164 formate do you have any ideas about the commands i need to put at my GW?

Actions

This Discussion