08-31-2007 12:03 PM - edited 03-05-2019 06:13 PM
I have a new 4506 with a SUP 4 engine and a WS-X4418-GB module installed. I want to trunk ISL to five 3560 switches through the GBIC fiber ports on the 4418 module. I can only get the 4506 configured for ISL on the first two ports of the 4418 module. Ports 3-5 will only take dot1.q trunking. Should I be able to use ISL on all ports?
08-31-2007 12:14 PM
Nope. You cannot use ISL on all ports. On the 4418, ports 3-18 does not support ISL.
By default, the Catalyst 4500 series switch that runs Cisco IOS Software supports both ISL and 802.1Q trunking modes. The support is on all interfaces except blocking Gigabit ports on the WS-X4418-GB and WS-X4412-2GB-T modules. These ports do not support ISL and only support 802.1Q trunking. Ports 3 through 18 are blocking Gigabit ports on the WS-X4418-GB module. Ports 1 through 12 are blocking Gigabit ports on the WS-X4412-2GB-T module.
For more info, please refer to :
08-31-2007 12:16 PM
thanks, Ok I will use dot1.q
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide