anandramapathy Sat, 09/01/2007 - 00:22
User Badges:
  • Bronze, 100 points or more

check if the ASDM file is installed in the PIX / ASA. It will be in the flash with the PIX / ASA Boot image.


Dir flash:


if it is not present install the ASDM by downloading it from the cisco site. YOu may need a cisco login for this

brianbono Mon, 09/03/2007 - 10:21
User Badges:

check the version of your ASA...


sh ver


if it is running a ASA 8.x then try downloading the ASDM 6.x


you may have already downloaded the correct images but it was not loaded during startup. so try to verify if these configurations are present on your running config:


boot system disk0:/asa802-k8.bin

asdm image disk0:/asdm-602.bin


if not present, then enter those commands...



rate if it helps :)

Actions

This Discussion