cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
633
Views
8
Helpful
2
Replies

ASA ASDm

mframadan
Level 1
Level 1

unable to lanuch asdm from 192.168.2.1

the device 192.168.2.1 dose not have the apporpriate device manager image installed

2 Replies 2

anandramapathy
Level 3
Level 3

check if the ASDM file is installed in the PIX / ASA. It will be in the flash with the PIX / ASA Boot image.

Dir flash:

if it is not present install the ASDM by downloading it from the cisco site. YOu may need a cisco login for this

check the version of your ASA...

sh ver

if it is running a ASA 8.x then try downloading the ASDM 6.x

you may have already downloaded the correct images but it was not loaded during startup. so try to verify if these configurations are present on your running config:

boot system disk0:/asa802-k8.bin

asdm image disk0:/asdm-602.bin

if not present, then enter those commands...

rate if it helps :)

Review Cisco Networking products for a $25 gift card