Cisco 876

Answered Question
Sep 1st, 2007

Hi,

Please tell me how to configure Fast ethernet ports in 876 router.

Unable to assign ip address to the ethernet prots.

sh ip int outputs

FastEthernet0 is up, line protocol is down

Internet protocol processing disabled

FastEthernet1 is up, line protocol is down

Internet protocol processing disabled

FastEthernet2 is up, line protocol is down

Internet protocol processing disabled

FastEthernet3 is up, line protocol is down

Internet protocol processing disabled

I have this problem too.
0 votes
Correct Answer by mohammedmahmoud about 9 years 3 months ago

Hi,

Assign each interface to a specific vlan then configure the IP address under the SVI interface:

1.Create the VLAN:

vlan database

vlan x

exit

2.Assign an interface to a VLAN:

interface fastethernetx

switchport access vlan x

Assign an IP to the SVI interface:

3.interface vlan x

ip address x.x.x.x x.x.x.x

HTH,

Mohammed Mahmoud.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
mohammedmahmoud Sat, 09/01/2007 - 03:37

Hi,

Assign each interface to a specific vlan then configure the IP address under the SVI interface:

1.Create the VLAN:

vlan database

vlan x

exit

2.Assign an interface to a VLAN:

interface fastethernetx

switchport access vlan x

Assign an IP to the SVI interface:

3.interface vlan x

ip address x.x.x.x x.x.x.x

HTH,

Mohammed Mahmoud.

mohammedmahmoud Sat, 09/01/2007 - 05:12

Hi,

You are very welcomed, and thank you for using the rating system.

HTH,

Mohammed Mahmoud.

Actions

This Discussion