Capture Traffic - URGENT

Unanswered Question
Sep 1st, 2007
User Badges:

Hi,


I have an Customized Portal application which needs voice/video/authentication traffic to pass from inside natted server to outside...


Opening the required ports didnt help.


If I remove the access-list for inside network it works....


Can someonehelp to give the capture commands .... so that I could capture the traffic and get the required ports....


Or some-other means to get the required ports.....


Thanks


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
rajinikanth Sun, 09/02/2007 - 05:39
User Badges:
  • Bronze, 100 points or more

Hi


use this command


capture capture_name [access-list acl_id][buffer bytes] [ethernet-type type][interface name] [packet-length bytes]



to view

show capture [capture_name] [access-list acl_id] [detail] [dump]


For additional information check this link

http://www.cisco.com/en/US/docs/security/pix/pix62/command/reference/c.html#wpxref65943


HTH

Raj


Actions

This Discussion