cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
616
Views
0
Helpful
1
Replies

how to create the ACL

gopal3171
Level 1
Level 1

how to create the access list in the cisco 2811 and how to activate the acl

1 Reply 1

sadbulali
Level 4
Level 4

Because the Cisco IOS Firewall uses Cisco IOS access control lists (ACLs) as the first line of defense on packets entering the router, if logging is enabled on an interface ACL entry that is permitting packets to get to the firewall, you may see that a packet is logged as being allowed. This log message can be ignored and for the disposition of the packet by the firewall, you should look for a subsequent log message displayed by the firewall.

To see the packets that are dropped by the firewall, the ip inspect log drop-pkt command must be enabled.

This URL should help you:

http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guide09186a008028b448.html

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco