09-02-2007 07:43 AM
dears,
i have connfigured my AS5400 as SS7 GW using this configuration:
aaa authentication login sanj_aaa1 group radius local none
aaa authentication ppp sanj_aaa1 group radius local none
aaa authorization exec sanj_aaa1 group radius local none
aaa authorization network sanj_aaa1 group radius local none
aaa accounting connection sanj_aaa1 start-stop group radius
voice class aaa 1
authentication method sanj_aaa1
authorization method sanj_aaa1
accounting method sanj_aaa1
radius-server attribute 6 on-for-login-auth
radius-server host 55.55.55.1 auth-port 1812 acct-port 1813 key 7 hello
radius-server timeout 50
radius-server deadtime 1
radius-server key 7 hello
radius-server vsa send accounting
radius-server vsa send authentication
gw-accounting aaa
gw-accounting aaa
-----------------------------------
but i recieved these error message:
*Jan 2 06:13:58.956: voip_rot_acct_supp_enabled: Rotary suppress disabled
*Jan 2 06:13:58.960: voip_update_ccapi_accounting(1465): WARNING: accounting start not send. return.
*Jan 2 06:13:58.984: get_acct_params(1466): ERROR: method "h323" not defined.
any help please...
09-03-2007 10:44 PM
aaa accounting connection h323 start-stop group radius
this is the correct command.
09-04-2007 08:39 AM
but i did not use h323 i am using SIP so also i need to add this command.... what about else it is correct.
thx......
09-14-2007 12:37 AM
Even if you use SIP, the H323 AAA commands will do the job as well!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: