Cisco Catalyst Express 500 Series Switches

tjacobjames · ‎09-02-2007

Can we force the Gigabit Ethernet port to be 1000 full duplex in Cisco Catalyst Express 500 series?

mohammedmahmoud · ‎09-02-2007

Hi,

Kindly check this document:

http://www.cisco.com/en/US/products/ps6545/products_user_guide_chapter09186a0080531ea9.html#wp172246

HTH,

Mohammed Mahmoud.

davidmeiker · ‎09-27-2010

Greetings

The CE500 have a CLI Mode, Yes it have! and you can force your interface!

But In my humble opinion I think its a Emulation of the CLI

When you do all the configuration in the SW, just type in you internet explorer.."http:// + IP Swithc + /exec" for example "http://192.168.10.2/exec"

And you can emulate the CLI in the CE500.

josue jonathan rivero herrera · ‎04-19-2012

Hi Jose Quintero...

i try change the configuration the port in the switch catalyst express 500, i need disable switchport port-security, a try with http://10.1.1.1/exec and save configuration with wr command, if a check the configuration de port is correct but i reboot the switch and check the configuration the port appear the switchport port-security configuration again.

do you know solve this??

thk and regards!!!