Rob Huffman Sun, 09/02/2007 - 18:38
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Ricardo,


The requirements are a little different between the various IP Phone models. Here is the info for CCM .42 which will carry over for CCM 4.3;


Cisco Unified IP Phone 7911G Administration Guide for Cisco Unified CallManager 4.2

Customizing the Cisco Unified IP Phone


http://www.cisco.com/en/US/products/hw/phones/ps379/products_administration_guide_chapter09186a00806904a8.html


Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Administration Guide for Cisco Unified CallManager 4.2(3)

Customizing the Cisco Unified IP Phone


http://www.cisco.com/en/US/products/hw/phones/ps379/products_administration_guide_chapter09186a0080724691.html


Cisco Unified IP Phone 7970 Series Administration Guide for Cisco Unified CallManager, Release 4.2 (for models 7970G and 7971G-GE)


Customizing the Cisco Unified IP Phone


http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7970g_7971g-ge/4_2/english/administration/guide/7970cst.html



Hope this helps!

Rob

Actions

This Discussion