08-28-2007 06:40 PM - edited 03-05-2019 06:09 PM
Hi,
I do not know why I can not login using ssh client to my router... here is my configuration.
Best regards and thks
Solved! Go to Solution.
09-03-2007 08:23 AM
Hi,
Try "login local" under vty.
!
line vty 0 4
access-class 102 in
password 7 xxxxx
login local
!
Regards,
-Shahzad
08-28-2007 06:40 PM
The new configuration is:
line con 0
line aux 0
line vty 0 4
access-class 102 in
password 7 xxxxx
login
transport input ssh
transport output none
09-03-2007 07:35 AM
Can you remove the access-class ?
Perhaps the ACL is blocking your session.
09-03-2007 07:37 AM
This acl permits me to connect to, if I delete this acl I can not connect
09-03-2007 08:23 AM
Hi,
Try "login local" under vty.
!
line vty 0 4
access-class 102 in
password 7 xxxxx
login local
!
Regards,
-Shahzad
09-03-2007 08:42 AM
Hi,
Was login "local" command which resolved my issue.
Thks a lot..
Best regards
09-03-2007 05:58 AM
What client are you using Putty?
I didn't see generate RSA key (crypto)
09-03-2007 06:00 AM
1) Create a local account
Ex,
username cisco priv 15 password cisco123
2) enable login under the vty
Ex,
line vty 0 4
login
3) Read up the troubleshooting and configuration steps at this link
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hsec_c/part25/ch10/schssh.htm
09-03-2007 06:05 AM
Edgar I apologize,Edison's link is much better sorry for the confusion!
09-03-2007 06:19 AM
Hi,
My ssh client is bitvise http://www.bitvise.com/tunnelier
There is already a root user with 15 level configured.
I use this profile to connect to but always is asking for the pass.. I use the correcto user/pass but nothing
09-03-2007 07:04 AM
1) Try another client such as putty or secure-crt.
2) enable login under the vty lines.
09-03-2007 07:16 AM
With putty..nothing
Ill try to change no login parameter
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: