IPCC Ent 6 - H.323 3rd party IVR transfers

Unanswered Question
Sep 3rd, 2007
User Badges:

I have an IPCC Enterprise 6.0 installation with CCM 4.1(3). We use MGCP 3845 PSTN gateways with multiple PRIs terminated on them. Agents use Cisco IP Phones.

We are in the process of planning the roll-out of a 3rd party IVR, identified to CallManager as an H.323 gateway, and using ICM Service Control to manage the IVR.

The issue is with transfers. We are given only two choices for transfers using H.323: H.450, and by bridging using an MTP. Of course, CCM doesn't support H.450 directly and bridging keeps one or more IVR ports busy for the length of the call.

As far as I know, there hasn't been any JTAPI CTI interface written for this vendor's product, so if that were the best option, something custom would have to be written.

So, with the information given, what is the best/cheapest way to transfer calls out of this new IVR?

Any suggestions gratefully accepted.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion