09-03-2007 08:47 PM
Having the below error when trying to archieve the config from some of the device (typically CISCO7609, WS-C6506-E) in the network.
CM0060 PRIMARY STARTUP Config fetch SUCCESS for ABC, version number 1 archived. CM0061 PRIMARY RUNNING Config fetch SUCCESS for ABC, no change in configuration.CM0151 VLAN RUNNING Config fetch failed for ABC Cause: Couldnot create file in /tftpboot directory.VLAN Config fetch is not supported using TFTP.Failed to detect SSH version running on the device. VLAN Config fetch is not supported using RCP. Action: Check if protocol is supported by device and required device package is installed. Check device credentials. Increase timeout value, if required.
09-04-2007 07:47 AM
Check the permissions on /tftpboot. They should be 1777. For example:
drwxrwxrwt 2 root other 1024 Sep 3 21:01 /tftpboot/
09-10-2007 03:09 AM
it worked...thank you very much...
but i have other problems, hope you can help...
1) 2 devices cannot get the config with the error below : """CM0056 Config fetch failed for JBRMPLS1CE Cause: CM0204 Could not create DeviceContext for 12 Cause: CM0206 Could not get the config transport implementation for 172.18.255.107 Cause: UNKNOWN Action: Check if required device packages are available in RME.
Action: Check if protocol is supported by device and required device package is installed."""
2) device inventory failed for most of the devices..
hope you can help...
09-10-2007 09:31 AM
You should open a new thread for the inventory issue.
As for the config issue, what type of devices are these? What are their sysObjectIDs?
09-10-2007 10:08 AM
its a catalyst 6504e...
i think it's related to the CM that i've upgraded ?
sysObjectID?? how do i find it?
09-10-2007 10:12 AM
The Cat6504E support was only recently added to RME. You should go to Common Services > Software Center > Device Update, select both Common Services and RME, then install all available updates.
09-10-2007 10:36 AM
any specific file/device i need to update as the ciscoworks is not connected to internet, i need to upgrade manually file by file..
09-10-2007 10:39 AM
You should grab all of the RME 4.0.5 device packages dated June 28, 2007 or later as well as the latest Common Services MDF package (currently 1.21).
09-10-2007 10:44 AM
okie..will try tomorrow..
will let u know if its successful..
09-10-2007 09:32 PM
it solved my problem on the config archieve...
thank you jclarke...
i'll open another topic for the inventory error...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: