09-04-2007 08:40 AM - edited 03-14-2019 11:22 PM
Hi all
Im a newbie when it comes to all this phone gubbins so forgive my lameness..
We've got a UC520 running CME connected to our ISDN via a BRI connection. All working great. Apart from.. when i call into the office from my mobile, I get Unknown Number appearing on my 7941.
In short, how do I get the calling nuber displayed on the phones rather than the cryptic Unknown Number?
Cheers
Solved! Go to Solution.
09-05-2007 06:42 AM
You might want to also check with your provider to find out if they support callerid or if you are set up to have it on your circuit.
09-04-2007 08:48 AM
Number should appear without any special command. Please send output of "debug isdn q931" taken with "term mon" first.
09-05-2007 01:06 AM
09-05-2007 06:42 AM
You might want to also check with your provider to find out if they support callerid or if you are set up to have it on your circuit.
09-05-2007 08:19 AM
Well it seems that BT haven't enabled CLIP on our circuit so thats why we arn't getting any caller id's!
Thanks
09-27-2007 02:54 PM
Looking at the debug, the calling number is not present only the called number... BT needs to fix it.
09-28-2007 05:55 AM
hmm.. not sure where to go now.. theres some posts saying that the number may well be chopped off by the telco.. your going with BT being at fault mate?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide