09-04-2007 11:57 AM - edited 03-03-2019 06:36 PM
Hi,
Does anyone know how i can find out which IOS version support 32 bit ASN's.
I have tried the software tool on the site but no joy yet.
Thanks
PD
09-04-2007 12:09 PM
Hi,
While searching on the same a while ago, i found the following:
GSR with a PRP-1 or PRP-2, and at least Engine 3 line cards, you can run IOS-XR 3.4 which fully supports 32-bit ASNs.
While it is not supported yet for IOS.
HTH,
Mohammed Mahmoud.
09-05-2007 08:25 AM
Thanks!
09-05-2007 08:47 AM
Hi,
You are very welcomed, you can check the following article its a very nice one regarding this topic:
Exploring Autonomous System Numbers
http://www.cisco.com/web/about/ac123/ac147/archived_issues/ipj_9-1/autonomous_system_numbers.html
and thank you for using the rating system.
HTH,
Mohammed Mahmoud.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: