Support of 2Mbps leased line on WIC-2T card on 2811 Router

Unanswered Question
Sep 4th, 2007

Hi There,


We are trying to terminate 2 Mbps leased line on WIC-2T port of 2811 router, but the line protocol shows down. Whereas leased lines of slower speed are working fine on same router and same WIC-2T card.

We shfted the line to 2620 router and it worked fine.

We tried to use other 2811 router and WIC-2T cards but the end result was same. Can anybody tell whether 2Mbps line is supported on 2811 router or there is some other issue?

Tks


Eesh

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
smothuku Tue, 09/04/2007 - 20:50

Hi Eesh ,


2811 supports 2 Mbps leased line.Line protocol dwon indicates that it is problem with line , not with wic- 2T.


Check the configuration of serial on both ends.


like bandwidth , encapsulation.


Thanks,

satish

sbgtsgcsd Tue, 09/04/2007 - 21:34

Hi sathish,

We have tried all the options. line is working fine on 2600 router.

it's a three line config containing Ip add, encap and bandwidth.

We tried changing bandwidth and encap but line does not come up.

Eesh

xianyong.deng Mon, 09/24/2007 - 17:11

i have the same expier.i wonder wic-2t can work fine with C2800 ,but wic-1t has no such thing.

Actions

This Discussion